Installing No-Drill Mount for Battery Doorbells

Hardware included

Illustration of No Drill Mount installation hardware.

Tools needed

Illustration of a screw driver to use as an installation tool.

Install a doorbell without a mounting bracket

1. Choose a smooth, even mounting surface, and wipe it clean.

Note: Do not install on glass.

2. Remove the protective strips from the adhesive tape.

Illustration of how to remove the Protective Strips for the No Drill Mount.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

Illustration of how to hold the No Drill Mount flat with the mounting surface.

4. Remove your doorbell’s faceplate.

Illustration of how to remove the Ring Battery Doorbell Faceplate.

5. Attach your doorbell using the four included mounting screws.

Illustration of how to attach the Ring Video Doorbell to the No Drill Mounting Bracket.

6. Refer to your doorbell setup guide to secure your doorbell.

Install a doorbell with a mounting bracket

1. Choose a smooth, even mounting surface, and wipe it clean.

NOTE: Do not install on glass.

2. Remove the protective strips from the adhesive tape.

Illustration of how to remove the Protective Strips for the No Drill Mount.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

Illustration of how to hold the No Drill Mount flat with the mounting surface.

4. Attach the mounting bracket using the four included mounting screws.

Illustration of how to attach the No Drill Mount Mounting Bracket.

5. Attach your doorbell to the mounting bracket.

Illustration of how to attach the Ring Battery Doorbell to the No Drill Mount Mounting Bracket.

6. Refer to your doorbell setup guide to secure your doorbell.

Install for a doorbell without a mounting bracket on a Wedge or Corner Kit

1. Choose a smooth, even mounting surface, and wipe it clean.

Note: Do not install on glass.

2. Remove the protective strips from the adhesive tape.

Illustration of how to remove the Protective Strips for the No Drill Mount.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

Illustration of how to hold the No Drill Mount flat with the mounting surface.

4. Attach the Wedge or Corner Kit using the two included bracket screws.

Illustration of how to attach a Ring Wedge Kit to the No Drill Mount Mounting Bracket.Illustration of how to attach a Ring Corner Kit to the No Drill Mount Mounting Bracket.

Note: If installing on a Wedge Kit, insert screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit.

5. Remove your doorbell’s faceplate.

Illustration of how to remove the Ring Battery Doorbell Faceplate.

6. Attach your doorbell using the four included mounting screws.

Illustration of how to attach the Ring Battery Doorbell to the Ring Corner Kit.

7. Refer to your doorbell setup guide to secure your doorbell.

Install a doorbell with a mounting bracket on a Wedge or Corner Kit

1. Choose a smooth, even mounting surface, and wipe it clean.

Note: Do not install on glass.

2. Remove the protective strips from the adhesive tape.

Illustration of how to remove the Protective Strips for the No Drill Mount.

3. Hold the mount against the mounting surface for five minutes and allow an hour for it to adhere.

Illustration of how to hold the No Drill Mount flat with the mounting surface.

4. Attach the Wedge or Corner Kit using the two included bracket screws.

Illustration of how to attach a Ring Wedge Kit to the No Drill Mount Mounting Bracket.Illustration of how to attach a Ring Corner Kit to the No Drill Mount Mounting Bracket.

Note: If installing on a Wedge Kit, insert screw into a threaded hole on either side of the bottom opening. For best results, only use one Wedge or Corner Kit.

5. Attach the mounting bracket using the four included mounting screws.

Illustration of how to attach the No Drill Mount Mounting Bracket.

6. Attach your doorbell to the mounting bracket.

Illustration of how to attach the Ring Battery Doorbell to the No Drill Mount Mounting Bracket.

7. Refer to your doorbell setup guide to secure your doorbell.

Removing your mount

1. Remove your doorbell and Wedge or Corner Kit (if installed).

2. Flip down both pull-tabs.

Illustration of the No Drill Mount Flip Down Pull Tabs.

3. Firmly hold the mount and gently pull down on both adhesive strips until the mount releases from the wall.

Illustration of how to pull down the No Drill Mount Adhesive Strips.

Last updated 6 months ago

Related Articles

    English (ANZ)Change
    ©2025 Ring LLC or its affiliates
    |
    ||