1. Open the Ring app to the main dashboard.
2. Tap

   Setup a Device

   at the bottom of the screen.
3. Tap

   Chimes

   .
4. Select your location or Add a New Location.
5. Tap

   I’m Ready to Scan

   and scan the QR code. If the QR code does not scan, tap

   Other Options

   and scan the barcode or enter the QR PIN manually.
6. Allow Location Services when prompted.
7. Select the location where you are adding Chime or Chime Pro or tap Add a New Location to enter a new address.
8. Choose a name for your Chime.
9. Tap

   I Have My Password

   .
10. Tap

    I Am Near The Device

    .
11. Plug your chime into a wall outlet.
    • If the light is flashing, tap

      The light is flashing
    • If the light is not flashing, press and hold the button on the side of the chime for five seconds.
12. Have your wifi password ready to enter.
13. When prompted, join the Ring wifi network.
14. Select your wifi network from the list and enter your wifi password.
15. Wait for the device to connect to the network, then complete setup.

Connecting Chime Pro to your Ring device(s) during setup:

1. Tap

   Connect

   when prompted.
2. Tap on the Ring device that should be connected to the Chime Pro network.
3. Tap on

   Switch to Chime Pro Network

   .
4. Tap on

   Connect to Chime Pro

   .
5. Wait for the Ring device to go into setup mode. If the Ring device does not go into setup mode, firmly press and hold the setup button for 1 or 2 seconds, then release it.
6. When the Ring device is in setup mode, tap

   Continue

   .
7. After the Ring video doorbell connects, tap on

   Got it

   .
8. Tap on

   I'm Done

   .

Connecting Chime pro to your Ring device(s) from the device’s settings in the Ring app:

1. Open the Ring app to the main dashboard.
2. Tap more (•••) on the camera you want to access.
3. Tap your device's settings.
4. Select

   Device Health

   .
5. Tap

   Change Network

   .
6. Tap

   Change Wifi Network

   .
7. Tap

   Connect to Chime Pro

   .